$Id: Changes,v 1.105 2002/09/22 18:22:57 joern Exp $ Revision history for dvd::rip 0.46 Sun 22 Sep 2002, joern Bugfixes: - project file version detection and auto conversion didn't work with files generated by 0.45 itself. 0.45 Sun 22 Sep 2002, joern Important note: =============== - File format changed with release 0.45_04. Files created with older versions will be converted automatically, but can't be used with older versions anymore after saving!!! Consider making backup copies of your project files. - This version of dvd::rip works with transcode 0.6.0 and 0.6.1. Further development is done using transcode 0.6.1, so this is the recommended version. Features: - after TOC reading and ripping a backup copy of the project file is stored to project/tmp/backup.rip. For all the people who forget to save their projects ;) - new audio filter selection: none (volume rescale only), range compression (using liba52) and normalizing (using transcode's port of mplayer's normalizing filter). It's not recommended to use volume rescaling in conjunction with the normalizing filter, because volume rescaling is done *after* normalizing, so the result may be distorted. That's why dvd::rip clears the volume rescale entry when normalizing is selected. Requested by Torsten Howard and Markus Liebl. Thanks to Tilmann Bitterberg for answering my questions regarding the filter execution order in transcode. - added a text entry for arbitrary command execution after transcoding, suggested by simbolo - added a checkbox "exit after transcoding" which saves the project and exits after transcoding. Suggested by Florin Andrei. - dvd::rip now uses transcode's option --print_status 20 to reduce the progress updating (only for transcode >= 0.6.1). Thanks to Tilmann Bitterberg for the hint. Bugfixes: - at least dvd::rip 0.44 cluster mode didn't report correct progress and fps information with transcode 0.6.1. - DVD image / on the fly ripping - transcode frame range selection didn't work, reported by Ryan Underwood - adding audio tracks didn't work, reported by Arne Driescher and Roland Seuhs - (S)VCD mode: splitting didn't work, reported by Markus Liebl - Cluster mode: audio transcoding didn't work if no volume rescale value was set - progress calculation was messed up when transcoding a frame range 0.45_05 Sun 15 Sep 2002, joern Features: - cluster mode adopted to new job execution subsystem, now it supports additional audio tracks. Not much tested yet. Reports (of bugs and success stories ;) are welcome. Bugfixes: - with Perl 5.8.0 opening a new project always threw an exception. Thanks to Raymond Olufsen for his report. - add. transcode option parser didn't recognize "-D -10" correctly, so -D and -10 didn't appear in a row in the final command. Reported by Lukas Ertl . - sometimes renaming of AVI files after splitting didn't worked. Removed this completely, now using the standard transcode method (name-0000.avi instead of name-01.avi) for standard and cluster mode. - removed "DVD on the fly transcoding may damage your drive" note. Was too hard and too confusing. Also the standard disclaimer in the GPL is sufficient. Note: - I took the Perl 5.8.0 issue as a occasion to upgrade my Perl installation to 5.8.0 (Debian rules, btw ;), so further development will be on 5.8.0. I don't plan to use any 5.8.0 features soon, so dvd::rip will run with 5.6.1 (and maybe on 5.005), too. 0.45_04 Sun 01 Sep 2002, joern Note: - File format changed for this release. Files created with older versions will be converted automatically, but can't be used with older versions anymore after saving!!! Consider making backup copies of your project files. - Please test this release. Many internals changed. Also I tested many scenarios, there may be bugs. Reports are welcome. Features: - multiple audio track support: add as much available audio tracks you want to the resulting AVI file ((S)VCD and cluster mode currently not supported but planned). Short description of how this works: - on the Transcode tab there are two popups in the audio options area: "Select a DVD audio track" and "Target track". - the first one lists all available tracks on the DVD - select an entry you want to have - then select the target track you want for the selected DVD track (starting with 0) - select as many DVD tracks you want and add them as target track 1, 2 and so on. - video bitrate calculation will take the additional audio tracks into account - by default the track you selected before ripping will be used as target track #0, which is dvd::rip's old behaviour. So you can ignore this feature, if you don't need it. - transcoding a frame range uses now fast VOB navigation, if possible (no slow skipping of the first frames). - major redesign of the internal command execution subsystem and progress information module - volume scanning can be done after ripping for arbitrary audio tracks. The correspondent button is beside the text entry field on the Transcode tab. Bugfixes: - added a proper -B option to mpeg2enc to get correct split points. Thanks for the hint to Michal Szymanski. - canceling a transcode process (in standard mode) killed all transcode processes, in case of several dvd::rip instances are started. Reported by Torsten Howard. - many changes to internals, cleaner code, improved maintainability, improved stability regarding unusual DVD's (e.g. titles without audio, very small chapters) 0.45_03 Sun Aug 25 2002, joern Bugfix: - audio channel selection was ignored for transcoding (always channel #0 was processed). 0.45_02 Sun Aug 18 2002, joern Features: - dvd::rip now compares the ripped frame count with frame count of the DVD title. If the difference is too big, a corresponding warning message appears. - ripping ETA/FPS calculation now considers the time needed to get the DVD title keys, so these values are more accurate now. - renamed clip&zoom preset "No Preset" to "No Modifications", suggested by Ole Tange - new data source modes: on the fly DVD transcoding and using an existent DVD image on harddisk. But these modes have some restrictions: * no fast preview frame grabbing * no movie preview starting at a specific frame * no psu core * no cluster mode Scanning for volume rescale information is optional for the new modes (this is usually done while ripping). This feature (and the whole release) is considered experimental, because I needed to make many changes to dvd::rip's internals. Please test all three modes and report bugs. Thanks. 0.45_01 Wed Aug 14 2002, joern Features: - added ffmpeg4 to the video codec list, suggested by Moritz Bunkus. - removed opendivx from the codec list because it's really outdated and shouldn't be used anymore (type it in by hand, if you *really* need it ;). Thanks for his suggestion go to Christoph Lampert. - new preference for default .rip file directory, suggested by Florin Andrei. - added a window manager icon (didn't forget it, Florin ;) Bugfixes: - to be consistent with the latest transcode release, I changed the "bits per kilo pixel" value of the Zoom Calculator window to "bits per pixel". Also the video bitrate was calculated based on 1024 instead of 1000. Now dvd::rip's values are equal with transcode's. Thanks for the hint to Markus Liebl . - general exception handler failed, when no project was open, reported by Jeremy Mann - fourth deinterlace option wasn't saved, reported by Torsten Howard. - if the VOB navigation file was incomplete or messed up illegal parameters were passed to transcode, which results in a misleading dvd::rip error message. Now you get a better error message. 0.44 Fri Jul 19 2002, joern No changes since 0.44_06, just a stable release. Important note for Cluster Mode: ================================ The internal data format of the cluster mode project files changed since version 0.43. You must finish all your projects and remove them from the cluster control daemon before upgrading. Otherwise dvdrip-master won't start, instead it will fail loading the projects with a fatal error message. If you forgot removing the projects using the GUI, you can delete the files by hand. Just enter: rm ~/.dvdrip-master/projects/* 0.44_06 Wed Jul 17 2002, joern Yet another pre-release record ;) Bugfixes: - Preview grabbing: disabled audio processing completely, because also with the changes of 0.44_04 preview grabbing still didn't work with some DVD's. Thanks to marc'O and Detlef Neubauer for their detailed bug reports. 0.44_05 Mon Jul 15 2002, joern Features: - added another deinterlacing option for automatic deinterlacing of single frames ("transcode -J 32detect=force_mode=3") - useful for NTSC material. Thanks for the hint to Torsten Howard. - dvdrip-master now checks for needed Perl modules and prints a more user friendly error message, pointing the user to the cluster mode documentation. - SVCD presets "16:9 -> 4:3 letterbox" (PAL and NTSC version) added. Some hardware DVD players have problems playing back 16:9 anamorph encoded SVCD's produced by transcode's mjpeg export filter. Bugfixes: - AC3 passthrough didn't work in chapter mode. Thanks for the detailed bug report to Patrick Pfifferling - volume rescale entry was missing in (S)VCD mode. 0.44_04 Sun Jul 07 2002, joern Features: - Completed Zoom Calculator window. You now can adjust *any* parameter, which affects aspect ratio, clipping and zoom calculation! Play around with it. Maybe not all parameters are self-explanatory. When I publish the next stable release the homepage documentation will cover all the details. Bugfixes: - with some DVD's preview grabbing didn't work. Thanks to Greg McLearn for his detailed bug report. There are still some DVD's which make problems, but this is indeed a transcode bug. - disc size popup didn't restore the 760 MB value (selected 700 MB instead) - sometimes smallest optimal zoom calculation didn't appear in Zoom Calculator's result list 0.44_03 Sat Jul 06 2002, joern Features: - added "Refresh" button to Zoom Calculator window. Bugfixes: - cluster mode wasn't working since 0.44_02 due to changes to the internal error handling in this version. 0.44_02 Sat Jun 29 2002, joern Features: - added global preference "Show tooltips". You must restart dvd::rip (or at least reopen the project) for this to take effect. - added global preference "Default Video Codec", so your favorite video codec is used by default - (S)VCD - for proper splitting dvd::rip now uses mpeg2enc's -S parameter. Thanks for the hint to Todd Inglett . dvd::rip reduces the target disc size internally by 1%, because there seems to be some mpeg overhead, which is not taken into account by mpeg2enc. - Joerg Friedrich told me, that the overall bitrate (audio + video) must not exceed 2748kbps for SVCD. dvd::rip now respects this limit. - I revised the internal ar/clip/zoom calculation code. All features regarding clip&zoom calculation now internally use the same algorithm. The quality of the auto detect presets benefits from this. - new "Zoom Calculator" window, which lists all possible target sizes with an acceptable aspect ratio error. Entries with perfect aspect ratio are highlighted in red. There is a column with a magic "BPKP" value. This stands for "bits per kilo pixel" and is an indicator for the image quality (taking image size and actual video bitrate into account). I don't have much experience with this value until know, but I think values around 500 produce very good quality. Feedback on this is very welcome. - "calc width/height" now works with fast resizing, too. Requested by Torsten Howard and Florin Andrei Bugfixes: - Cluster mode: target avi file hasn't the usual location in case of a one-psu-movie. - (S)VCD: mplex complained about missing %d in filename, even if no splitting was requested. I don't really understand this error, but now dvd::rip always adds %d to the filename. - somethime dvd::rip did consume 99% CPU after an unexpected error. I added a workaround for this a few versions ago, but now I think I really fixed this bug ;) - in case of a transcode problem the corresponding error message didn't show the correct transcode command if multipass was enabled. Thanks to David Kvarnberg for his extensive bug report. 0.44_01 Sun Jun 23 2002, joern Work in progress: - Cluster mode: went back to per-psu-audio-processing. At least in theory the old audio-all-in-one-processing procedure was problematic regarding NTSC A/V sync. Unfortunetaly A/V sync isn't better after these changes :( Not tested in detail yet, so cluster mode may have bugs in this version. Features: - new button on the Clip&Zoom tab: "Show video from here", which plays the video from the given frame number. Based on a patch from Wolfgang Kinkeldei . - illegal Clip&Zoom values are not just warned with an exclamation mark behind the corresponding value. They're also highlighted in red. Maybe in future versions a small button will appear in this case, which opens a window with more explanation of the problem. - added a tooltip to the Clip&Zoom images - Clip&Zoom: not only the effective ratio, also the physical ratio of each processing stage is printed. Bugfixes: - HQ presets sometimes produce odd clip values, which isn't allowed with YUV. Also they were not warned by dvd::rip. Thanks for their reports go to Davide Ferrari and Torsten Howard. 0.43 Sat Jun 15 2002, joern Bugfixes: - transcode-0.6.0pre6-0.20020608 changed the frame grabbing output filename, so dvd::rip's frame grabbing didn't work with this and newer releases. dvd::rip now uses a wildcard for the filename, so it should work with older and actual releases as well. Thanks for the numerous reports of this "bug" (too many to list them all here ;) - fixed a typo in the AVI file viewing command, which prevents backgrounding of the process. - added the prerequisite for Gtk::Gdk::Pixbuf to Makefile.PL, for automatic dependency resolution with CPAN or CPANPLUS. 0.42 Sun Jun 09 2002, joern Bugfixes: - Clip&Zoom: the autoadjust HQ presets didn't work for NTSC movies, and also the new "Calc Width/Height" feature which uses interally the HQ resizing algorithm. Thanks to Torsten Howard for his bug report - also some of the old static presets didn't work with NTSC. I decided to remove them completely, because they're not needed anymore since we have the auto-adjusting presets and the "Calc Width/Height" feature. They were confusing and made the preset list unnecessary long. 0.41 Sat Jun 08 2002, joern Note: You need at least transcode 0.6.0pre6-20020524 for this release! Features: - new "Calc Height" and "Calc Width" buttons on the Clip&Zoom tab. Just set the clipping parameters (e.g. using an autoadjust preset, or by hand), enter the desired width and press "Calc Height": the corresponding height which keeps aspect ratio will be calculated (the same for calculating the width while setting the height). Based on a suggestion from Florin Andrei. 0.41_03 Tue May 28 2002, joern Bugfixes: - a stupid typo bug made cluster mode audio transcoding fail. Thanks to Ryan Zachry for his extensive bug report. - Florin Andrei reported that the preview windows are strangly placed with Ximian Gnome desktop. I removed any positioning stuff, so the window manager can decide where to place the window. This should fix the problem. 0.41_02 Sun May 26 2002, joern Features: - support for transcode's new PSU core, which increases A/V sync quality for NTSC material. You need at least transcode version 0.6.0pre6-20020524 for this feature. Note: this is currently not supported by the cluster mode. - cluster mode: ssh command now defaults to 'ssh -x', ("don't try to establish X forwarding"). Suggested by Matthias Riese - enabled AC3 passthrough support for cluster mode - video player is now customizable, requested by Guillaume Rousse . There are two new entries in the global preferences dialog: DVD player, and file player. These are templates for the appropriate commands. The following format strings are recognized: %t DVD title (1..n) %a Audio Channel (0..n) %c Chapter (1..n) %m Viewing Angle (1..n) %f Filename Strings enclosed in <> will be repeated for each selected entry (e.g. DVD Chapter or filename). Also you can specify arbitrary expressions using %() brackets, e.g. %(%c-1) will evaluate to the actual chapter minus 1. Defaults for xine and mplayer are present, but you can customize these entries if you like. The debugging window shows the result of both command templates, so you can see how your changes take effect. xine dvdnav plugin is not tested yet, feedback is welcome. Bugfixes: - dvd::rip ripping looped with title 1 if no title was selected. Thanks to Stefan Opsomer for his extensive bug report. Also Jure Pecar reported this a few weeks ago, but I couldn't reproduce it until now. - Sven Hartge reported a problem with preview frame grabbing if an audio channel != 0 was ripped. I can't reproduce the problem, maybe it's DVD dependent, but I disabled audio decoding for preview grabbing completely, because it wasn't useful anyway. - Debugging Window threw an exception if it was opened before ripping the title. Thanks to Ian Truelsen for his bug report. - fixed Gtk-Warning when closing a project, thanks to Florin Andrei for his detailed bug report. - Cluster node test suite always reported Ok for all sub tests, no matter if the configuration is correct or not. Thanks to Matthias Riese for his bug report. - "make test" complained about missing "splitpipe" on first time installation, if user doesn't have "." in PATH. 0.41_01 Thu May 17 2002, joern Features: - control of transcode's new audio dynamic range compression feature, requested by Christian Lambert. - removed all transcode 0.5.3 specific code, because this version isn't supported anymore - after ripping a title the preview frame entry is automatically pointed to the middle of the movie resp. of the first ripped chapter. Suggested by Michael Dodwell . Additionally the preview image is grabbed immediately afterwards. Bugfixes: - transcode options field didn't recognize long options always correctly - fast preview frame grabbing didn't work in chapter mode 0.40 Tue May 13 2002, joern Note: - please install at least transcode-0.6.0pre5-20020514. Some older versions have a bug with chapter selection which crashes dvd::rip's ripping procedure. Features: - dvdrip command now supports --version (or -version or -v) to print the version number, suggested by Michael Bushey - unexpected error message with command output are now displayed in a textarea, so they're cut and pastable (better for bug reporting ;) Bugfixes: - many enhancements regarding the handling of unexpected errors - no need to cancel the operation manually anymore - error output of some commands was missing - dvd::rip consumed 99% of CPU, thanks for the report to Andreas Theofilu . I didn't really solved this problem but added a workaround which should help in most situations. Otherwise you should restart dvd::rip after a fatal error which let dvd::rip itself occupating the whole CPU. This seems to be a very strange bug around Gtk::input_add... - cluster mode transcode progress information was messed up due to slightly changes of transcode's output format. - newer versions of avisplit croak on absolute filename parameters (I reported this already as a bug to Thomas), so dvd::rip now changes into the data directory and uses relative filenames. Thanks to Davide Ferrari for his bug report. - mplex segfaulted if Transcode+Split was chosen (used %s instead of %d in the output pattern) - VCD mode: --export-asr is set to 2 instead of 1. Thanks for the hint to Andreas Theofilu 0.40_01 Sat May 11 2002, joern Note: - this and all subsequent dvd::rip releases require transcode 0.6.0pre4 or better. Features: - added a Credits file, which lists all users who helped me making dvd::rip a better tool. - added "divx5" to the video codec popup - chapter mode has now - (S)VCD transcoding - transcode progress information (you need to rip the chapters again until this works) Bugfixes: - dvd::rip didn't confirm program exit in case of unsaved changes if the window was closed using the window manager Thanks to Davide "Vide" Ferrari for his bug report. - appending transcode options did not work if a negative nice value was given. Thanks to Torsten Howard for his bugreport. - (S)VCD mode: - splitting using mplex -S often results in smaller chunks. I added -M to prevent that (must be tested, don't know if this really solves the problem). Also there was a %s missing in mplex's file output pattern, which made split mode fail. Thanks to Michael Bushey for his report. - disc size popup was disabled in VCD mode, which made it impossible to select a proper disc size for splitting. - fixed a progress bug in chapter mode 'all' ripping 0.39 Sat Apr 27 2002, joern Bugfixes: - "4:3 No Letterbox, Fast Resize" preset violated shrink/expand fast resize rule. - VCD did produce anamorphic result, which isn't supported by the spec. The frame is now resized with aspect ratio correction, --export-asr is set to 1 so signal that the movie has already the correct aspect ratio. SVCD presets still result in anamorphic videos. This isn't currently tested for NTSC, but should work. 0.39_05 Wed Apr 17 2002, joern Features: - Cluster mode: - improved Node test. Unrecognized output from the client is reported, which helps solving unusual ssh problems Bugfixes: - Cluster mode: transcode test was broken - (S)VCD mode: use --export_asr to set correct aspect ratio for the generated mpeg file. Thanks to Uwe Fischer for his hint and extensive feedback on (S)VCD mode. - VCD was broken, it was in fact a somewhat reduced SVCD rip. This one was reported by Uwe Fischer, too. 0.39_04 Wed Apr 10 2002, joern Features: - rip a multiple selection of titles at once, suggested by Hrvoje Husic . First adjust options (audio, viewing angle, chapter mode) for each title, then select all titles using Ctrl and/or Shift key and press "Rip Selected Title(s)" as usual and all titles are ripped without interception, each with the options you specified before. Bugfixes: - audio bitrate parameters were not passed to transcode in cluster mode. Thanks to Rainer Lay for the bug report. 0.39_03 Tue Apr 9 2002, joern Bugfixes: - convert NTSC framerate 29.97 to -f 30,4 instead of -f 30,1. Thanks to Thomas Östreich for the hint. 0.39_02 Sun Apr 7 2002, joern Features: - added 160 kbit/s to audio bitrate popup, requested by Christian Lambert - frame rate values 23.976 and 29.97 are interally converted to transcode's -f 24,1 (resp. 30,1), so transcode calculates with exact values for NTSC movies. With transcode 0.6.0pre5-* you can try to ommit the framerate completely, because these transcode versions do a better job with autodetecting. Thanks to Christian Lambert for his hint. - I added some experimental (S)VCD capabilities. Not tested very well and also my knowledge about (S)VCD is very limited, so this first version might have fundamental problems, but I created (S)VCD mpegs which are played well by xine. Not tested yet with a standalone DVD player. You'll need the mjpeg tools and transcode's mjpeg export filter. bbmpeg filter is currently unsupported. I'll really appreciate any hints regarding the (S)VCD mode. MINI HOWTO: on the Clip&Zoom tab select one of the (S)VCD ----------- presets (PAL or NTSC). They only will scale the image to the correct target size, assuming the player will correct the aspect ratio (worked at least with xine, but maybe dvd::rip has to take care of it). On the Transcode tab select SVCD or VCD as Video Codec. All parameters which doesn't make sense for (S)VCD will either be disabled or set to some fixed values (e.g. bitrates in case of VCD). The .mpg file will appear in the AVI target folder of the project. Cluster mode does not support (S)VCD, also the Chapter Mode isn't available yet for (S)VCD (to be added in future releases). Bugfixes: - size of the 1st clipping image was not calculated in realtime after changing 1st clipping values by hand. Also "Move 2nd Clipping" threw an exception if the width and height fields were empty. Thanks to Akos Maroy for his detailed bugreport. 0.39_01 Sat Apr 6 2002, joern Features: - major redesign of the Transcode tab. Grouping of the options should now make much more sense. Video Codec, Video Framerate, Audio Bitrate and Process nice level are combo boxes with reasonable preset values. - video bitrate calculation is much more flexible: you can enter a target size by hand or use the dics count and size popups for calculating the target size. All values are recalculated on demand, no need to press a "suggest bitrate" button anymore. Inspired by a suggestion of Chrstian Lambert putting more values into the disc size popup. - divx4 multipass is switched on by default - new MP3 Quality popup, suggested by Christian Lambert. Needs transcode 0.6 or better. Default is best quality (on my system I loose only about 0.5 fps compared with transcode's medium quality default value), and I want dvd::rip to default to high quality rips. Bugfixes: - in seldom cases dvd::rip threw an error message at the end of the preview frame grabbing. This happend with projects which were ripped with 0.37, saved without making a preset selection, and then opened with 0.38. Thanks to Davide "Black Shark" for his bug report. - the nice program is not installed under /usr/bin/nice on all Linux systems. nice is now executed with `which nice`, so this hopefully is no longer a problem. Thanks to Alexander Toppmann and Christian Lambert, who reported that this is a problem on Red Hat and Mandrake systems. - Alexander Troppmann also reported that the Cluster Node test suite fails, if different RedHat releases are used on master and slave (7.2 vs. 7.0), because of different implementations of the ls command - *sigh*. I implemented the directory content test with "echo" instead, hopefully at least this behaves identically on all Linux systems... ;) 0.38 easter-egg Sun Mar 31 2002, joern No changes since last pre-release, except for a graphical dvd::rip startup message, which is totally useless but nice ;) 0.38_03 Fri Mar 29 2002, joern Note: - the project file format has changed. For existent projects: note the volume rescale value before upgrading and set it by hand afterwards. Features: - lpcm encoded audio is supported, no passthrough but mp3 encoding. - changed "Suggest Bitrates" button to "Suggest V-Bitrate". Audio bitrate is untouched so you can enter your favourite audio bitrate and press the button to get the corresponding video bitrate for your target size selection. Bugfixes: - all presets produce now height clippings with even values. Odd values result in artefacts if "Use YUV Internal" is activated, which is always recommended because it's faster. - transcoding without audio didn't work. I did not really fix this bug, because I decided that deactivating audio makes no sense anyway, so the "bugfix" was simply removing the feature ;) - cluster mode merging and split progress did not work 0.38_02 Thu Mar 28 2002, joern Features: - Frame ratios, width and height are now updated immediately when you change values in the Clip & Zoom text fields. - I adjusted the "Autoadjust HQ Resize" presets. Big is now the whole frame (with correct aspect ratio), medium 75% and small 50% of the frame. (was: 75%, 62.5%, 50%). - auto adjusting and all presets now produce final frame sizes which are divisible by 16, because at least the divx4 codec produces strange color artefacts if this rule is violated (Thanks to Christoph Lampert for his hint about this, which saved me much debugging time) - you see exclamation marks behind sizes of the final image, which are not divisble by 16 Bugfixes: - splitpipe.c did not compile on PPC architectures. Thanks to Martin Hill for his patch. 0.38_01 Sun Mar 24 2002, joern Note: - from now on you need at least transcode-0.6.0pre4-20020322 for Cluster Mode - this is a pre-release because the new auto adjust feature needs some testing. Also you currently must patch transcode's avimerge program for getting proper progress information in Cluster Mode for audio merge (details below). Features: - with transcode version 0.6.0pre4 dvd::rip supports the new fast resize mode which can be used with multiple of 8 frame sizes. All fast resize presets use this if possible for hitting the aspect ratio more exactly. - new "Autoadjust Presets" with big, medium and small target frame sizes, with or without fast resize option. Everything is detected automatically: letterbox/black bars, aspect ratio etc. The fast resize presets are only available with transcode 0.6.0pre4. - now the *real* aspect ratio is printed under each preview image after image regeneration. That means clipping is ignored. "16:9" and "4:3" are printed if the corresponding ratio occurs. Future releases will display the aspect ratio in realtime when sizes are changed by hand, not only after image regeneration. - Cluster Mode: - no video-merge job anymore, using an actual extension of transcode which supports this. Video merging is done with audio multiplexing in one step. This saves time and disk space. - now the merge job has progress information, too (when Thomas applied my avimerge patch. transcode-0.6.0pre4-20020324 does not contatin it so you must apply it by hand: see ./patches directory) - Cluster Control Daemon now checks for prerequisites and throws appropriate error messages if something is missing (pstree or suid root fping) - you now can configure the number of frames per chunk in the Edit Cluster Project dialog. Default is 10000. If the performance of your cluster nodes differs much you can decrease this value to prevent slow nodes from blocking the whole cluster with transcoding a huge chunk while the others are idle. Note: decreasing the chunk size too much makes 2-pass encoding useless, because the material for analysis becomes too short. Bugfixes: - sometimes dvd::rip reported twice as much audio channels 0.37 Sun Mar 17 2002, joern Note: - first finish all Cluster Mode projects before updating. Job workflow and file system layout did change. - creating target AVI files >2GB does not work in Cluster Mode due to problems with transcode's avimerge program. Maybe this doesn't work on my system only, so if anyone has success building larger files, please drop me a note. Features: - Cluster Mode: - Now the overall runtime for a project is printed when it's finished. - executed commands are now logged already at the default log level 2 - due to on error aborted jobs doesn't stop the node anymore. If you stop a node the corresponding job doesn't get the 'aborted' state, instead it's set to 'waiting'. This way one aborted job doesn't effect the whole process by blocking the corresponding node. Bugfixes: - Cluster Mode: - was still broken, if a title consists of more than one PSU. Now the whole internal workflow changed. Audio transcoding is done for the whole movie, not per PSU. There is no merge per PSU anymore. All chunks are merged into one AVI, before adding the audio. - one side effect of this change is, that it's not possible to select which PSUs should be processed. The corresponding selection list disappeared from the Edit Cluster Project dialog. All PSUs are always processed from now, as in standard mode. - scheduler: local jobs of other projects with lower priority were preferred instead of finishing the actual project first. - fps and ETA of transcode video/audio jobs are now more exact, particularly at the beginning of the job. 0.36 Thu Mar 14 2002, joern Bugfixes: - Cluster Mode: - audio merging didn't work if the movie had more than one PSU, because the target directory wasn't created in that case. Thanks to Sebastian Beneke for his bug report. 0.35 Wed Mar 13 2002, joern Features: - Cluster mode: - added test procedure which checks if a node is configured correctly: ssh connection, r/w NFS access and transcode version match are checked. Currently this works by comparing the output of a test script executed on the node and the machine where the dvd::rip GUI runs on. You can execute the test procedure from the "Edit Node" window. - the "audio processing" job is now splitted into two jobs: audio transcoding and a/v multiplexing. This enables running the audio transcoding in parallel with other jobs, e.g. video transcoding. Finally the audio and video chunks have to be multiplexed, what is single threaded again, but much faster than the old audio processing job, which blocks the project nearly at the end for a longer time, what was really frustrating ;). Thanks to Rainer Lay for his idea. - minimum chunk count is now (online nodes + 1) instead of 2. - you can start dvdrip with option -c to open the cluster control window without opening a main window Bugfixes: - audio bitrate was always set to AC3 passthrough bitrate when a project was opened from file - Cluster mode: - in rare cases and when there was heavy traffic on the network, the Cluster Control Daemon erroneously determined that a node is offline and aborted the current job. Now the offline state is checked twice, so this shouldn't happen anymore. 0.34 Sun Mar 03 2002, joern Note: - Cluster mode: you need the pstree command on the cluster control computer from now Features: - Cluster mode: - now you can reset a single job, if something went wrong with it, so you don't have to start the whole project again. All dependent jobs are reset automatically. Thanks to Sloan Poe for his suggestion. - cluster mode scheduler optimization regarding the delegation of IO intensive jobs preferably to nodes with local resp. fast file system access. In earlier versions a local node could be blocked too early by a non-local job, so local jobs later had to be delegated to non-local nodes. The scheduler now tries delegating local jobs to local nodes first, and then normal jobs to idle nodes, if there are any. - you can optionally let dvd::rip delete the VOBs after finishing, making bigger project queues possible, even with little harddisk space (but is risky, if something goes wrong). - AC3 audio passthrough support. If you're upgrading and you have an existent project, you need to rip the title again, because the necessary probing is done directly after ripping. There is no restriction for new projects. - Currently it's not possible to use AC3 passthrough in cluster mode, because I hadn't the time to test it. - the layout of the Transcode Tab changed slightly, to get space for the AC3 radio buttons. - all directories are now created with mode 0775, to prevent file access problems in cluster mode, if the user ids of all nodes doesn't match. Suggested by Sloan Poe. - range transcoding: default for the start value is 0. default for end value is number of frames. Until now you had to fill both values to get a range transcoding. Suggested by Douglas Bollinger . Bugfixes: - Cluster mode: - on some systems stopping a node didn't work (dvd::rip hung). Now the child process is killed explicitely and this should work on any system. You need 'pstree' on the cluster control computer from now. Thanks to Sloan Poe, who helped me debugging this problem. - in multipass mode dvd::rip tried moving the AVI file to its final destination after the first pass. This threw an error message, but had no other effect. Anyway it was useless and confusing. - switching off avisplit of a just added project didn't work - removed DVD mount point from preferences, because this isn't needed anymore 0.33 Tue Feb 19 2002, joern Bugfixes: - The node name/hostname feature didn't work. The cluster control daemon always tried to fping the node name instead of the hostname. Thanks to Rainer Lay for the bug report. 0.32 Mon Feb 18 2002, joern Features: - (one feature so this isn't only a bugfix release ;) You can enable a transcoding preview window. You need the filter_preview transcode plugin, which is build automatically if you have libdv installed on your system. Also your X Server must have XV support. Really nice feature. Useless, but fancy ;) Warning: closing the preview window will kill the transcode process. Bugfixes: - Some cluster jobs were aborted due to timeout accidentally. Because there occur some really strange problems with the output of avimerge, I disabled the timeout completely. This shouldn't matter, because it was added to prevent hanging ssh sessions which prompt for a password. This case is catched anyway not using a timeout, so everything should work better this way. Thanks for the reports to Andrew Yantis and Rainer Lay. - project progress didn't count aborted jobs. They are now added to the waiting value. Thanks to Rainer again for this one. - nice -n made problems with tcsh. Using /usr/bin/nice instead. Guess who reported this one? Yes. Thanks Rainer ;) - no progress was shown on avisplit due to a bug in the avisplit output parsing regex. 0.31 Sun Feb 17 2002, joern Features: - You can provide additional transcode options on the Transcode Tab. These options are added to the internal transcode call, resp. they override corresponding options already computed by dvd::rip. This is for experts who want to use special transcode features not currently officially supported by dvd::rip (or to fix dvd::rip bugs which are not fixed yet ;). - adjusting the nice level of the transcode process per project (also used in cluster mode) on the Transcode Tab. Suggested by Hrvoje Husic. - Cluster Mode: - error handling for remotely executed commands. The last lines received from the command are logged, so you can see what's going wrong. Also the corresponding node will be aborted. You have to start it again, otherwise no jobs will be scheduled to it. This prevents infinite job execution on a false configured node. - internal node name and hostname of the node are now distinguished (useful to address multi processor machines as multiple nodes). Suggested by Rainer Lay. - additional transcode options per node (samy funcionality as described for non cluster mode above). One good example for this is increasing transcode threads if you have a multi- processor node (e.g. -u 4,2). Suggested by Peter Lohmann. Bugfixes: - cluster daemon hung if ssh prompted for a password. - made TOC list wider so content should fit better 0.31_05 Tue Feb 13 2002, joern Bugfixes: - All regarding the cluster mode and reported by Rainer Lay - command execution via the hardwired 'ssh -CP' command made problems, at least with OpenSSH. You now can configure the ssh command per Node in the Edit Node window. Default is 'ssh -C' which should work on most systems. - many commands had a construct "test dir || mkdir -p dir", where the "test" command is a nop, because "mkdir -p" doesn't fail, if the directory exists. Removed the "test" command. 0.31_04 Tue Feb 12 2002, joern Features: - Added a job list to the cluster mode, accompanied by rewriting some internals. This was necessary to get rid of the PSU problem without messing up the internal cluster workflow. The advantage is, now you can exactly see what steps have to be done. Bugfixes: - cluster mode now supports titles encoded in more than one program stream unit. Thanks to Thomas Östreich for his help. - Net::Ping was loaded in cluster mode, but is not required anymore. - Hrvoje Husic told me, that 760 MB seems to be the maximum to burn on an 800 MB medium, so I corrected the corresponding disc popup entry. - Layout of the Transcode Tab was somewhat messed up, at least with the default Gtk theme. I shrinked the buttons so now everything should fit. Thanks to Torsten Howard for reporting this "buglet" (his word ;) 0.31_03 Sat Feb 09 2002, joern Note: - Cluster mode is currently useless for titles with more than one program stream unit (that means: many DVDs are affected). I'm working on this issue, resp. am in contact with Thomas Östreich to check, whether transcode or dvd::rip should fix this. - WARNING: first finish all your cluster projects before upgrading to this version, because cluster file names changed. Features: - Cluster Mode - multipass encoding now supported - show ETA for transcoding and audio processing states - optional avisplit and cleanup after transcoding. you can edit these project properties in the Cluster Control window - cluster control daemon can be shut down from the GUI - multipass encoding: omit audio on first pass, thanks to Norbert Preining for his hint. - better NTSC Support, suggested by Norbert Preining - set frame rate by default to 23.976, but user can overwrite it - set transcode options: -g 720x480 -M 2 - disc popup now has an entry for 800 MB discs, thanks to Hrvoje Husic for his hint. Bugfixes: - Cluster Mode - adding a node with an existent name crashed the cluster control daemon - dvd::rip GUI now handles cluster daemon exits cleanly - View AVI works now for cluster transcoded titles - adding chapter mode titles to the cluster is prevented now - project removal threw an exception, sometimes - no volume rescaling was done - daemon crashed if a log client sent something - Storable module was required, even when no cluster stuff was activated. Thanks to Timothy Harris and Torsten Howard for their bug reports. 0.31_02 Mon Feb 04 2002, joern Bugfixes: - sometimes dvd::rip stopped transcoding too short. This release should fix this problem. Thanks to Doug Shea for his bug report and for the hint, which led me to the solution (omitting the transcode -c 0-n parameter). 0.31_01 Sun Feb 03 2002, joern Features: - all generated files and directories now have names with correct alphanumerical order. Thanks to Doug Shea for his patch. WARNING: First finish all projects before upgrading to this version, because dvd::rip 0.31_01 will badly fail finding files generated with previous versions!!! - this is the first public pre-release with cluster transcoding support. Please refer to the dvd::rip homepage for documentation about this. - omit '-J skip="0-2"' in chapter mode if transcode version >= 0.6 is detected. Thanks for the hint go to Norbert Preining and Ron Smits . Bugfixes: - opened project was not closed, if you opened it via command line option and opened a new project via menu 0.30 Sat Jan 19 2002, joern Features: - Christian Lambert sent me an enhanced version of my fast resize calculator kspread file. Bugfixes: - creating a new project failed with an exception, thanks to Christian Lambert for his bug report. - splitpipe did not work correctly if you use transcode 0.5.x, thanks to Marc Wäckerlin for his bug report. - opening the "Show transcode commands" window without an opened project threw an exception. 0.30_01 Sat Jan 12 2002, joern Quick pre-release, because I like this feature so much ;) Features: - added fast frame grabbing using the vob navigation information created by 'tcdemux -W' for transcode >= 0.6.0pre. Frame grabbing now needs a constant amount of time (2-3 seconds on my A1000 workstation), regardless of the frame number, you entered. transcode 0.5.x is still supported, using the -c option, which is slow because it decodes all precedent frames. Thanks to Thomas Östreich, who helped me demystifying the navigation logfile ;) 0.29 Thu Jan 10 2002, joern Features: - transcode version is detected on startup, so different behaviour for different transcode versions is possible. - preparing for cluster mode: dvd::rip already creates the neccessary vob navigation logging data. Bugfixes: - ripping progress bar enabled for transcode >= 0.6.0 (you *must* use at least transcode-0.6.0pre2-20020107. Older 0.6.0 pre-releases will cause dvd::rip to fail badly or just freezing it). dvd::rip uses the new -W switch of tcdemux to get the progress in the ripping stage. This gives even enough information to calculate fps. Coooool... ;) - You can use dvd::rip with transcode 0.5.x (x>=3), but the ripping progress bar will be disabled. 0.29_01 Sun Jan 07 2002, joern Bugfixes: - DVD TOC reading completely reorganized. Should work now more reliable with all DVDs. Due to this there is currently no progress bar for ripping available. - DVD TOC missed scrollbars - transcode progress bar did not work with transcode 0.6pre 0.28 Fri Jan 04 2002, joern Features: - I added a contrib directory to the distribution, currently containing a KSpread file which helps calculating fast resize values. I'm planning to integrate a native and quite more usable version of this sheet into dvd::rip, but maybe this helps someone while this feature is not finished. On the other hand the presets are working well for most DVDs, so this is currently a nice to have feature for me. Bugfixes: - avisplit progress bar missed percentage and ETA. - fast resize option did not always complain about illegal values, thanks to Christian Lambert for the bug report. 0.28_03 Thu Jan 03 2002, joern Features: - Full viewing angle support, requested by Certron DiSoni . You can select the viewing channel after reading the TOC. Only the selected angle will be ripped from the DVD. This way I was able to rip german Star Wars Episode I, with the german intro. Bugfixes: - transcode progress bar missed percentage and ETA. 0.28_02 Thu Jan 03 2002, joern Again a pre-release due to major changes in the progress module and chapter mode code. Please test it. Thanks. Features: - enhanced chapter mode suggested by Tim Currie : dvd::rip now shows a multi selection list of avaiable chapters per title. Now you can decide which chapters should be ripped and transcoded. Currently no progress bar is shown in the chapter selection mode, only the elapsed time will be printed. Also avisplit is currently not available in chapter mode. I'm not shure, if transcode reports the correct number of chapters. Often the higher chapters are empty or at least *very* short. - major code cleanup in the progress bar module. Among other things a Gtk input handler is used instead of a Gtk idle function. This way the GUI responses much better. Also all calculations (elapsed time, ETA, fps) are done by dvd::rip now and available for all tasks. Bugfixes: - fixed chapter mode transcoding progress bar / logging problem - dvd::rip failed if the project path was not absolute. Thanks to George Farris for the report. 0.28_01 Fri Dec 28 2001, joern This is a pre release for testing the new Chapter Mode feature. Please use this version only, if you're interested in this feature or if you want to test it in general. Also non-Chapter-Mode ripping may be affected or buggy. Features: - Chapter Mode, suggested by Norbert Preining. You have to enable this on the RIP Title Tab before ripping, because each chapter will be ripped into a separate directory. Transcoding in chapter mode will lead to one AVI file for each chapter. The progress bar guesses sometimes wrong, but the result should be Ok. Splitting in Chapter Mode is not supported and makes no sense in general. - removed the tcprobe-random-title-permutation workaround, because this tcprobe bug is fixed in transcode 0.5.3 Bugfixes: - dvd::rip didn't work with transcode 0.5.3 due to changes of tcprobe output. Thanks to Thomas Speck for his bug report. This release has a workaround fixing this problem. Another solution is to patch transcode 0.5.3 with a patch published by Thomas Östreich on his transcode homepage. 0.27 Tue Dec 18 2001, joern Bugfix: - this release fixes only a minor bug in the debugging window and log file output. The snapshot command missed the frame number, so the -c option was malformed. 0.26 Sun Dec 16 2001, joern Bugfix: - tar.gz distribution was incomplete. Updated MANIFEST. 0.25 Sat Dec 15 2001, joern Features: - create logfile of all processes, display it in a separate logging tab - renamed "Snapshot Directory" to "Temp Directory", because it's used not only for the snapshot images. DivX4 analyze logs and the dvd::rip log are also stored here. Bugfixes: - "transcode & split" did not work - spaces in project name not allowed, thanks to Matthias Rieber for the bug report. dvd::rip did not work correctly with spaces in the project name. Checking of other user supplied values is still on my TODO list. 0.24 Thu Dec 13 2001, joern Just a major release, no changes since pre-release. 0.24_02 Tue Dec 11 2001, joern Features: - You can open a debugging window, which shows all transcode commands executed by dvd::rip by pressing Ctrl+T or selecting the "Debug/Show Transcode Commands..." menu item. Thanks to Norbert Preining for his suggestion. This should help finding bugs in dvd::rip, where wrong transcode options are genereated, or something similar. - modified 16:9 anamorph fast resizing Preset: added 2nd Clipping to get rid of 4 black top and bottom lines - Added a transcode title number field to the rip tab. This way you can workaround the transcode/libdvdread bug which results to wrong assigned titles. Please use this with care and only if you know, what you do. This fields changes only the title number passed to all transcode commands. The dvd::rip filenames will be named with the orignally (maybe wrong) scanned title nr. Thanks to Bjoern Buerger for his suggestion. Bugfixes: - Preset "16:9 Anam. Enc., No Letterbox, Fast Resize" did not switch fast resizing on - Fast Resizing: 32 pixel boundary must be given only for axes which are resized. Thanks to Norbert Preining for his patch. - dvd::rip now checks, whether VOB files are already ripped, even if the project file says, they're not (e.g. if you forget to save after ripping, restart dvd::rip and create a new project for this DVD). Thanks to Norbert Preining for the hint. - dvd::rip now checks if the needed programs (transcode, ImageMagick etc.) are installed and complains if not. Thanks to Michal Szymanski for his bugreport. 0.23 Sun Dec 09 2001, joern Bugfixes: - fast resizing: 32 pixel boundary check ommited checking the clip1 size - transcode progress label did always show the "split afterwards" message, even if started without splitting. 0.22 Sun Dec 09 2001, joern Features: - Support of the fast resizing algorithm of transcode (transcode-0.5.2-20011206 is recommended because of a bug in the horizontal fast resize code in earlier versions). Fast resizing presumes 32 pixel boundaries. If you break with this rule, you'll get an error window on transcoding. I'm planning a wizard which helps calculating the correct values, because this can be a brain squeezing task ;) - Added two new Presets for anamorph transcoding using the fast resizing algorithm. They should bypass the time, until the fast resizing wizard is finished. - Support of multipass DivX encoding. - Added a button to the Transcode tab for viewing the transcoded non-splitted AVI file. - transcode progress label shows, whether started with or without splitting Bugfixes: - applied Perl 5.005 patch supplied by Norbert Preining . Thanks. - DVD read-toc code always tried a mount, even if the DVD was already mounted. This could confuse systems using automounter. 0.21 Sat Dec 01 2001, joern Features: - transcode 0.5.1 supports 4GB AVI files, so max. filesize for the bitrate suggestion is now 4000 MB (was 2000 MB with transcode 0.5.0) Bugfixes: - fixed color problem with snapshot images 0.20 Tue Nov 27 2001, joern - First public release. Should be usable but is not tested with thousands of DVDs.